selected processor does not support `vstmdbeq r0!,{s16-s31}’ in Thumb mode

Hi, I have the following errors since I added freertos from STM32CubeMX 5.0.1: Error: selected processor does not support `vstmdbeq r0!,{s16-s31}’ in Thumb mode Error: instruction not allowed in IT block — `stmdb r0!,{r4-r11,r14}’ Error: selected processor does not support `vldmiaeq r0!,{s16-s31}’ in Thumb mode Error: instruction not allowed in IT block — `msr psp,r0′ I’m actually working on JetBrains CLion 2019.1.3 with MinGW v5.0 and Cmake bundle v3.14.3, openocd-0.10.0, gcc-arm-none-eabi-7-2017-q4-major-win32-sha2.exe, windows seven and the stm32373c-eval. I tried the following changes accordingly to what I founded on different topics in the CMakeLists.txt:

Uncomment for hardware floating point

SET(FPU_FLAGS “-mfloat-abi=hard -mfpu=fpv4-sp-d16”)

adddefinitions(-DARMMATHCM4 -DARMMATHMATRIXCHECK -DARMMATHROUNDING -D__FPU_PRESENT=1)

Uncomment for software floating point

SET(FPU_FLAGS “-mfloat-abi=soft”)

SET(COMMONFLAGS “-mcpu=cortex-m4 ${FPUFLAGS} -mthumb -mthumb-interwork -specs=nosys.specs -specs=nano.specs -specs=rdimon.specs -Wl,-Map=output.map -Wl,–gc-sections -lm -o -ffunction-sections -fdata-sections -g -fno-common -fmessage-length=0″) This changes works on a windows seven computer with exactly the same configuration but neither on my W10 or seven.

selected processor does not support `vstmdbeq r0!,{s16-s31}’ in Thumb mode

I’m not sure if this post is asking a question, but I am curious as to why the version of Windows on the host machine makes any difference – I would imagine it would be more likely that the version of GCC being used in each case was different.

selected processor does not support `vstmdbeq r0!,{s16-s31}’ in Thumb mode

totaly agree but I try to look for the smallest possibility of answer to understand why I get those errors, I’m a little bit out of ideas. I just try to take the project from working computer and run it on my computer, it work without any probleme until I re-run the code generation with cubeMx. So I still don’t understand why cubeMx on my computer change something wrong even if I put the parameters exactly the same way as on the other computer